登录注册
微信扫码登录
CrealityCR1S5至CoreXY（CrusaXYHB1）（ID:166058）
2.jpg)
0.jpg)
4.jpg)
3.jpg)
1.jpg)
| # | 文件名称 | 文件大小 |
|---|---|---|
| 1 | 15mm_Pulley_Spacer.STL | 84.72K |
| 2 | 2040_support_bracket.STL | 770.54K |
| 3 | 2040_support_bracket_split.STL | 376.28K |
| 4 | 4.4mm_Pulley_Spacer.STL | 84.72K |
| 5 | 60_tooth_Pulley.STL | 3.03M |
| 6 | 8.8mm_Pulley_Spacer.STL | 84.72K |
| 7 | Assembly_Instruction_CrusaXY_HB1_r1.0.pdf | 14.68M |
| 8 | Back_Lower_Pillow_Bearing.STL | 684.43K |
| 9 | Back_Right_lower.STL | 843.42K |
| 10 | Back_Right_lower_with_brim.STL | 926.07K |
| 11 | Back_Right_upper.STL | 743.62K |
| 12 | Back_Right_upper_with_brim.STL | 851.58K |
| 13 | Belt_Attachment_A.STL | 1.27M |
| 14 | Belt_Attachment_B.STL | 1.27M |
| 15 | Blank_Extruder_Mount.STEP | 116.49K |
| 16 | Blank_Extruder_Mount_no_cutout.STEP | 1.15M |
| 17 | BLTouch_Mount_for_Main_Extruder.STL | 496.96K |
| 18 | COMPLETE_Bracketes_and_Spacers.stl | 1.79M |
| 19 | COMPLETE_Extruder_Mount.stl | 2.12M |
| 20 | COMPLETE_XYU.stl | 2.35M |
| 21 | COMPLETE_Z-Axis.stl | 4.37M |
| 22 | Endstop_Mount_A.STL | 407.66K |
| 23 | Endstop_Mount_B.STL | 407.64K |
| 24 | Front_Lower_Pillow_Bearing.STL | 695.59K |
| 25 | Front_Right_lower.STL | 843.46K |
| 26 | Front_Right_lower_with_brim.STL | 926.14K |
| 27 | Front_Right_upper.STL | 744.16K |
| 28 | Front_Right_upper_with_brim.STL | 852.13K |
| 29 | IDEX_Belt_Cover.STL | 138.78K |
| 30 | IDEX_Belt_Cover_with_tabs.STL | 239.25K |
| 31 | IDEX_Belt_Mount.STL | 1.71M |
| 32 | IDEX_Detachable_Extruder_Mount.STL | 809.24K |
| 33 | idler_pulley_5mm_ID_z_axis.STL | 312.60K |
| 34 | Linear_Rod_Support.STL | 759.33K |
| 35 | Linear_Rod_Support_with_endstop.STL | 1.14M |
| 36 | Main_Detachable_Extruder_Mount.STL | 1001.51K |
| 37 | Main_Plate_Cover.STL | 134.55K |
| 38 | Main_Plate_Cover_cut_shorter.STL | 134.56K |
| 39 | Middle_Left_lower.STL | 1.07M |
| 40 | Middle_Left_lower_with_brim.STL | 1.11M |
| 41 | Middle_Left_upper.STL | 990.11K |
| 42 | Middle_Left_upper_with_brim.STL | 1.01M |
| 43 | Middle_Lower_Pillow_Bearing.STL | 3.51M |
| 44 | Motor_Mount_IDEX_right_Side.STL | 1.62M |
| 45 | Motor_Mount_left_Side.STL | 1.34M |
| 46 | Motor_Mount_right_Side.STL | 1.35M |
| 47 | Prusa_MK3_Extruder_Plate.STL | 707.49K |
| 48 | Prusa_MK3_Extruder_Plate_mirrored.STL | 716.35K |
| 49 | Prusa_MK3_Extruder_Plate_without_cover.STL | 669.36K |
| 50 | Pulley_cover_IDEX_V2_left_side.STL | 671.70K |
| 51 | Pulley_cover_IDEX_V2_right_side.STL | 672.55K |
| 52 | Pulley_cover_V2_left_side.STL | 284.87K |
| 53 | Pulley_cover_V2_right_side.STL | 283.70K |
| 54 | Pulley_Mount_IDEX_left_side.STL | 1.21M |
| 55 | Pulley_Mount_IDEX_right_side.STL | 1.20M |
| 56 | Pulley_Mount_left_side.STL | 1.21M |
| 57 | Pulley_Mount_right_side.STL | 1.21M |
| 58 | Rear_Support_Plate.STL | 1.15M |
| 59 | teflon_5mm_washer.STL | 84.72K |
| 60 | XY_Bracket_Left_Side.STL | 3.03M |
| 61 | XY_Bracket_Right_Side.STL | 3.02M |
| 62 | xy_endstop_11mm_spacing.STL | 185.20K |
| 63 | Zaxis_Motor_Mount.STL | 537.34K |
| 64 | Zaxis_Motor_Mount_mirrored.STL | 537.30K |
| 65 | Zaxis_Motor_Mount_supported.STL | 550.05K |
| 66 | Zaxis_Motor_Mount_supported_mirrored.STL | 550.00K |
| 67 | card_preview_2040_support_bracket.STL | 39.85K |
| 68 | card_preview_2040_support_bracket_split.STL | 37.50K |
| 69 | card_preview_60_tooth_Pulley.STL | 45.68K |
| 70 | card_preview_Back_Lower_Pillow_Bearing.STL | 47.92K |
| 71 | card_preview_Back_Right_lower.STL | 43.17K |
| 72 | card_preview_Back_Right_lower_with_brim.STL | 44.35K |
| 73 | card_preview_Back_Right_upper.STL | 41.38K |
| 74 | card_preview_Back_Right_upper_with_brim.STL | 38.67K |
| 75 | card_preview_belts3.jpg | 26.75K |
| 76 | card_preview_belts4.jpg | 25.72K |
| 77 | card_preview_belts5.jpg | 15.40K |
| 78 | card_preview_Belt_Attachment_A.STL | 43.65K |
| 79 | card_preview_Belt_Attachment_B.STL | 46.41K |
| 80 | card_preview_BLTouch_Mount_for_Main_Extruder.STL | 43.23K |
| 81 | card_preview_capture2.JPG | 15.16K |
| 82 | card_preview_capture3.JPG | 13.24K |
| 83 | card_preview_capture4.JPG | 15.13K |
| 84 | card_preview_capture5.JPG | 18.61K |
| 85 | card_preview_COMPLETE_Bracketes_and_Spacers.stl | 47.97K |
| 86 | card_preview_COMPLETE_Extruder_Mount.stl | 45.66K |
| 87 | card_preview_COMPLETE_XYU.stl | 49.39K |
| 88 | card_preview_COMPLETE_Z-Axis.stl | 46.14K |
| 89 | card_preview_Front_Lower_Pillow_Bearing.STL | 48.31K |
| 90 | card_preview_Front_Right_lower.STL | 43.97K |
| 91 | card_preview_Front_Right_lower_with_brim.STL | 44.81K |
| 92 | card_preview_Front_Right_upper.STL | 42.12K |
| 93 | card_preview_Front_Right_upper_with_brim.STL | 38.73K |
| 94 | card_preview_IDEX_Belt_Cover.STL | 45.28K |
| 95 | card_preview_IDEX_Belt_Cover_with_tabs.STL | 47.06K |
| 96 | card_preview_IDEX_Belt_Mount.STL | 51.56K |
| 97 | card_preview_IDEX_Detachable_Extruder_Mount.STL | 45.51K |
| 98 | card_preview_idler_pulley_5mm_ID_z_axis.STL | 44.05K |
| 99 | card_preview_IMG_20191024_102635_3.jpg | 36.60K |
| 100 | card_preview_IMG_20191116_193432_4.jpg | 40.28K |
| 101 | card_preview_Linear_Rod_Support.STL | 44.34K |
| 102 | card_preview_Linear_Rod_Support_with_endstop.STL | 44.85K |
| 103 | card_preview_Main_Detachable_Extruder_Mount.STL | 49.06K |
| 104 | card_preview_Main_Plate_Cover.STL | 46.09K |
| 105 | card_preview_Main_Plate_Cover_cut_shorter.STL | 45.14K |
| 106 | card_preview_Middle_Left_lower.STL | 42.63K |
| 107 | card_preview_Middle_Left_lower_with_brim.STL | 44.84K |
| 108 | card_preview_Middle_Left_upper.STL | 34.40K |
| 109 | card_preview_Middle_Left_upper_with_brim.STL | 34.18K |
| 110 | card_preview_Middle_Lower_Pillow_Bearing.STL | 49.28K |
| 111 | card_preview_Motor_Mount_IDEX_right_Side.STL | 43.49K |
| 112 | card_preview_Motor_Mount_left_Side.STL | 42.39K |
| 113 | card_preview_Motor_Mount_right_Side.STL | 42.39K |
| 114 | card_preview_Prusa_MK3_Extruder_Plate.STL | 43.83K |
| 115 | card_preview_Prusa_MK3_Extruder_Plate_mirrored.STL | 46.67K |
| 116 | card_preview_Prusa_MK3_Extruder_Plate_without_cover.STL | 46.37K |
| 117 | card_preview_Pulley_cover_IDEX_V2_left_side.STL | 49.61K |
| 118 | card_preview_Pulley_cover_IDEX_V2_right_side.STL | 45.16K |
| 119 | card_preview_Pulley_cover_V2_left_side.STL | 47.52K |
| 120 | card_preview_Pulley_cover_V2_right_side.STL | 42.09K |
| 121 | card_preview_Pulley_Mount_IDEX_left_side.STL | 44.33K |
| 122 | card_preview_Pulley_Mount_IDEX_right_side.STL | 45.11K |
| 123 | card_preview_Pulley_Mount_left_side.STL | 44.33K |
| 124 | card_preview_Pulley_Mount_right_side.STL | 43.37K |
| 125 | card_preview_Rear_Support_Plate.STL | 42.76K |
| 126 | card_preview_XY_Bracket_Left_Side.STL | 47.99K |
| 127 | card_preview_XY_Bracket_Right_Side.STL | 52.49K |
| 128 | card_preview_xy_endstop_11mm_spacing.STL | 34.96K |
| 129 | card_preview_Zaxis_Motor_Mount.STL | 47.42K |
| 130 | card_preview_Zaxis_Motor_Mount_mirrored.STL | 47.85K |
| 131 | card_preview_Zaxis_Motor_Mount_supported.STL | 47.46K |
| 132 | card_preview_Zaxis_Motor_Mount_supported_mirrored.STL | 48.00K |
| 133 | large_display_12dice_DualDice20191123-51-1948xbk.stl | 430.13K |
| 134 | large_display_20191110_085707.jpg | 296.26K |
| 135 | large_display_20191110_085726.jpg | 421.90K |
| 136 | large_display_2D_KOALA.stl | 419.84K |
| 137 | large_display_2D_PANDA.stl | 372.95K |
| 138 | large_display_4-box-v2.stl | 477.82K |
| 139 | large_display_6erBatt.jpg | 140.58K |
| 140 | large_display_75339541_1388128474685248_4691735262407950336_n.jpg | 87.55K |
| 141 | large_display_9.jpg | 368.45K |
| 142 | large_display_ancient_india_project_game_board.stl | 573.40K |
| 143 | large_display_cane.png | 458.75K |
| 144 | large_display_Column_10.stl | 397.18K |
| 145 | large_display_Corner_Shelf_Part2.stl | 504.26K |
| 146 | large_display_customizable_logitech_mount_20191119-68-1b73z47.stl | 475.44K |
| 147 | large_display_doublewasher_20191110-56-mg9aea.stl | 369.13K |
| 148 | large_display_doublewasher_20191110-62-1d9c832.stl | 347.87K |
| 149 | large_display_Drive_Enclosure_Undertable_Mount_.stl | 635.05K |
| 150 | large_display_DSC00840b.jpg | 297.16K |
| 151 | large_display_DSC00842b.jpg | 307.63K |
| 152 | large_display_Empacher_Slot_Bike_Light_Holder.stl | 395.20K |
| 153 | large_display_ender5_cable_chain_bottom_bracket_v1.stl | 477.26K |
| 154 | large_display_Foregrip_Jaw.stl | 549.86K |
| 155 | large_display_hellbron.stl | 506.85K |
| 156 | large_display_Hex_Full_Foregrip.stl | 414.81K |
| 157 | large_display_Hornet_Arm_Left.stl | 360.54K |
| 158 | large_display_Hornet_Leg.stl | 347.61K |
| 159 | large_display_Hornet_Pelvis.stl | 526.17K |
| 160 | large_display_Hornet_Torso.stl | 532.21K |
| 161 | large_display_Hornet_Working_File.stl | 428.56K |
| 162 | large_display_IMG_4193.JPG | 249.42K |
| 163 | large_display_KOALA.png | 681.79K |
| 164 | large_display_linear_scale_shim_24mm_lang.stl | 383.36K |
| 165 | large_display_lithophaneornament_20191119-50-vlv4ml.stl | 444.47K |
| 166 | large_display_msgkeychainv2_20191110-56-1b9ouhr.stl | 441.89K |
| 167 | large_display_name_and_text_vh_20191110-56-l8v2z6.stl | 509.17K |
| 168 | large_display_outerfacev2-rbsmall.stl | 442.16K |
| 169 | large_display_panda.png | 259.55K |
| 170 | large_display_Pax_Hanger.jpg | 174.90K |
| 171 | large_display_poprawka.obj | 471.77K |
| 172 | large_display_pulley_t-mxl-xl-htd-gt2_n-tooth_20191110-50-1b7puc2.stl | 462.86K |
| 173 | large_display_pulley_t-mxl-xl-htd-gt2_n-tooth_20191110-57-1kgh2gp.stl | 470.30K |
| 174 | large_display_reinforce_for_angle.stl | 402.77K |
| 175 | large_display_Schneemann_V3-3color_Zylinder.stl | 438.35K |
| 176 | large_display_shooting_star.stl | 449.46K |
| 177 | large_display_Skyzone02C_3rd_Strap_Adapter.stl | 512.00K |
| 178 | large_display_square_wrench_v1.stl | 517.56K |
| 179 | large_display_stencil_20191110-68-1uc0veg.stl | 338.32K |
| 180 | large_display_sweeping_name_plate_vzp_20191110-62-1c1qo1.stl | 653.32K |
| 181 | large_display_Universal_Bike_Light_Stem.stl | 382.25K |
| 182 | large_display_unlimbitedphoenix_Gauntlet20191111-69-1rvrxq2.stl | 431.50K |
| 183 | large_display_unlimbited_arm_v2-1_Cuff20191123-63-ipzybz.stl | 506.46K |
| 184 | large_display_Wolf-Handle-Complete.stl | 471.40K |
| 185 | large_display_Wolf-Handle-Left.stl | 476.46K |
| 186 | large_display_Wolf-Handle-Right.stl | 490.91K |
| 187 | large_display_wtFRONT.png | 129.09K |
| 188 | large_display_wtSIDE.png | 154.83K |
| 189 | large_display__LJ_Thingi_001.jpg | 303.53K |
| 190 | large_preview_2040_support_bracket.STL | 28.43K |
| 191 | large_preview_2040_support_bracket_split.STL | 26.79K |
| 192 | large_preview_60_tooth_Pulley.STL | 32.38K |
| 193 | large_preview_Back_Lower_Pillow_Bearing.STL | 34.17K |
| 194 | large_preview_Back_Right_lower.STL | 30.64K |
| 195 | large_preview_Back_Right_lower_with_brim.STL | 31.32K |
| 196 | large_preview_Back_Right_upper.STL | 29.38K |
| 197 | large_preview_Back_Right_upper_with_brim.STL | 27.15K |
| 198 | large_preview_belts2.jpg | 9.49K |
| 199 | large_preview_belts3.jpg | 19.35K |
| 200 | large_preview_belts5.jpg | 11.28K |
| 201 | large_preview_Belt_Attachment_A.STL | 30.17K |
| 202 | large_preview_Belt_Attachment_B.STL | 32.23K |
| 203 | large_preview_BLTouch_Mount_for_Main_Extruder.STL | 30.98K |
| 204 | large_preview_capture1.JPG | 7.29K |
| 205 | large_preview_capture2.JPG | 11.34K |
| 206 | large_preview_capture3.JPG | 9.96K |
| 207 | large_preview_capture4.JPG | 11.68K |
| 208 | large_preview_capture5.JPG | 14.27K |
| 209 | large_preview_COMPLETE_Bracketes_and_Spacers.stl | 33.90K |
| 210 | large_preview_COMPLETE_Extruder_Mount.stl | 32.49K |
| 211 | large_preview_COMPLETE_XYU.stl | 34.57K |
| 212 | large_preview_COMPLETE_Z-Axis.stl | 32.62K |
| 213 | large_preview_Front_Lower_Pillow_Bearing.STL | 34.30K |
| 214 | large_preview_Front_Right_lower.STL | 31.58K |
| 215 | large_preview_Front_Right_lower_with_brim.STL | 31.74K |
| 216 | large_preview_Front_Right_upper.STL | 30.10K |
| 217 | large_preview_Front_Right_upper_with_brim.STL | 27.59K |
| 218 | large_preview_IDEX_Belt_Cover.STL | 32.08K |
| 219 | large_preview_IDEX_Belt_Cover_with_tabs.STL | 33.39K |
| 220 | large_preview_IDEX_Belt_Mount.STL | 36.40K |
| 221 | large_preview_IDEX_Detachable_Extruder_Mount.STL | 32.35K |
| 222 | large_preview_idler_pulley_5mm_ID_z_axis.STL | 31.66K |
| 223 | large_preview_IMG_20191024_102635_3.jpg | 26.84K |
| 224 | large_preview_IMG_20191116_193432_4.jpg | 29.11K |
| 225 | large_preview_kinematics1to1.jpg | 10.23K |
| 226 | large_preview_Linear_Rod_Support.STL | 31.77K |
| 227 | large_preview_Linear_Rod_Support_with_endstop.STL | 32.34K |
| 228 | large_preview_Main_Detachable_Extruder_Mount.STL | 34.65K |
| 229 | large_preview_Main_Plate_Cover.STL | 32.46K |
| 230 | large_preview_Main_Plate_Cover_cut_shorter.STL | 32.03K |
| 231 | large_preview_Middle_Left_lower.STL | 30.18K |
| 232 | large_preview_Middle_Left_lower_with_brim.STL | 31.61K |
| 233 | large_preview_Middle_Left_upper.STL | 24.12K |
| 234 | large_preview_Middle_Left_upper_with_brim.STL | 23.88K |
| 235 | large_preview_Middle_Lower_Pillow_Bearing.STL | 34.84K |
| 236 | large_preview_Motor_Mount_IDEX_right_Side.STL | 30.75K |
| 237 | large_preview_Motor_Mount_left_Side.STL | 30.27K |
| 238 | large_preview_Motor_Mount_right_Side.STL | 30.28K |
| 239 | large_preview_Prusa_MK3_Extruder_Plate.STL | 31.13K |
| 240 | large_preview_Prusa_MK3_Extruder_Plate_mirrored.STL | 33.35K |
| 241 | large_preview_Prusa_MK3_Extruder_Plate_without_cover.STL | 32.93K |
| 242 | large_preview_Pulley_cover_IDEX_V2_left_side.STL | 35.13K |
| 243 | large_preview_Pulley_cover_IDEX_V2_right_side.STL | 32.10K |
| 244 | large_preview_Pulley_cover_V2_left_side.STL | 33.87K |
| 245 | large_preview_Pulley_cover_V2_right_side.STL | 29.97K |
| 246 | large_preview_Pulley_Mount_IDEX_left_side.STL | 31.44K |
| 247 | large_preview_Pulley_Mount_IDEX_right_side.STL | 32.00K |
| 248 | large_preview_Pulley_Mount_left_side.STL | 31.44K |
| 249 | large_preview_Pulley_Mount_right_side.STL | 30.98K |
| 250 | large_preview_Rear_Support_Plate.STL | 30.46K |
| 251 | large_preview_XY_Bracket_Left_Side.STL | 33.80K |
| 252 | large_preview_XY_Bracket_Right_Side.STL | 37.03K |
| 253 | large_preview_xy_endstop_11mm_spacing.STL | 25.28K |
| 254 | large_preview_Zaxis_Motor_Mount.STL | 33.63K |
| 255 | large_preview_Zaxis_Motor_Mount_mirrored.STL | 33.74K |
| 256 | large_preview_Zaxis_Motor_Mount_supported.STL | 33.59K |
| 257 | large_preview_Zaxis_Motor_Mount_supported_mirrored.STL | 33.78K |
| 258 | large_thumb_2040_support_bracket.STL | 12.58K |
| 259 | large_thumb_2040_support_bracket_split.STL | 12.03K |
| 260 | large_thumb_60_tooth_Pulley.STL | 14.42K |
| 261 | large_thumb_Back_Lower_Pillow_Bearing.STL | 14.57K |
| 262 | large_thumb_Back_Right_lower.STL | 13.14K |
| 263 | large_thumb_Back_Right_lower_with_brim.STL | 13.44K |
| 264 | large_thumb_Back_Right_upper.STL | 12.75K |
| 265 | large_thumb_Back_Right_upper_with_brim.STL | 11.60K |
| 266 | large_thumb_belts2.jpg | 4.56K |
| 267 | large_thumb_belts3.jpg | 8.93K |
| 268 | large_thumb_belts4.jpg | 8.68K |
| 269 | large_thumb_belts5.jpg | 5.53K |
| 270 | large_thumb_Belt_Attachment_A.STL | 12.91K |
| 271 | large_thumb_Belt_Attachment_B.STL | 13.90K |
| 272 | large_thumb_BLTouch_Mount_for_Main_Extruder.STL | 13.71K |
| 273 | large_thumb_capture1.JPG | 3.94K |
| 274 | large_thumb_capture2.JPG | 5.68K |
| 275 | large_thumb_capture3.JPG | 4.82K |
| 276 | large_thumb_capture4.JPG | 5.70K |
| 277 | large_thumb_capture5.JPG | 6.66K |
| 278 | large_thumb_COMPLETE_Bracketes_and_Spacers.stl | 14.11K |
| 279 | large_thumb_COMPLETE_Extruder_Mount.stl | 13.54K |
| 280 | large_thumb_COMPLETE_XYU.stl | 14.37K |
| 281 | large_thumb_COMPLETE_Z-Axis.stl | 13.39K |
| 282 | large_thumb_Front_Lower_Pillow_Bearing.STL | 14.75K |
| 283 | large_thumb_Front_Right_lower.STL | 14.01K |
| 284 | large_thumb_Front_Right_lower_with_brim.STL | 13.74K |
| 285 | large_thumb_Front_Right_upper.STL | 13.48K |
| 286 | large_thumb_Front_Right_upper_with_brim.STL | 11.96K |
| 287 | large_thumb_IDEX_Belt_Cover.STL | 13.92K |
| 288 | large_thumb_IDEX_Belt_Cover_with_tabs.STL | 15.07K |
| 289 | large_thumb_IDEX_Belt_Mount.STL | 15.89K |
| 290 | large_thumb_IDEX_Detachable_Extruder_Mount.STL | 14.27K |
| 291 | large_thumb_idler_pulley_5mm_ID_z_axis.STL | 14.62K |
| 292 | large_thumb_IMG_20191024_102635_3.jpg | 11.67K |
| 293 | large_thumb_IMG_20191116_193432_4.jpg | 12.79K |
| 294 | large_thumb_kinematics1to1.jpg | 4.59K |
| 295 | large_thumb_Linear_Rod_Support.STL | 14.41K |
| 296 | large_thumb_Linear_Rod_Support_with_endstop.STL | 14.60K |
| 297 | large_thumb_Main_Detachable_Extruder_Mount.STL | 15.27K |
| 298 | large_thumb_Main_Plate_Cover.STL | 14.26K |
| 299 | large_thumb_Main_Plate_Cover_cut_shorter.STL | 14.19K |
| 300 | large_thumb_Middle_Left_lower.STL | 13.06K |
| 301 | large_thumb_Middle_Left_lower_with_brim.STL | 13.53K |
| 302 | large_thumb_Middle_Left_upper.STL | 10.06K |
| 303 | large_thumb_Middle_Left_upper_with_brim.STL | 9.93K |
| 304 | large_thumb_Middle_Lower_Pillow_Bearing.STL | 14.96K |
| 305 | large_thumb_Motor_Mount_IDEX_right_Side.STL | 13.21K |
| 306 | large_thumb_Motor_Mount_left_Side.STL | 13.06K |
| 307 | large_thumb_Motor_Mount_right_Side.STL | 13.20K |
| 308 | large_thumb_Prusa_MK3_Extruder_Plate.STL | 14.17K |
| 309 | large_thumb_Prusa_MK3_Extruder_Plate_mirrored.STL | 15.06K |
| 310 | large_thumb_Prusa_MK3_Extruder_Plate_without_cover.STL | 14.70K |
| 311 | large_thumb_Pulley_cover_IDEX_V2_left_side.STL | 15.26K |
| 312 | large_thumb_Pulley_cover_IDEX_V2_right_side.STL | 13.88K |
| 313 | large_thumb_Pulley_cover_V2_left_side.STL | 14.86K |
| 314 | large_thumb_Pulley_cover_V2_right_side.STL | 13.07K |
| 315 | large_thumb_Pulley_Mount_IDEX_left_side.STL | 13.76K |
| 316 | large_thumb_Pulley_Mount_IDEX_right_side.STL | 13.99K |
| 317 | large_thumb_Pulley_Mount_left_side.STL | 13.76K |
| 318 | large_thumb_Pulley_Mount_right_side.STL | 13.68K |
| 319 | large_thumb_Rear_Support_Plate.STL | 14.19K |
| 320 | large_thumb_XY_Bracket_Left_Side.STL | 14.87K |
| 321 | large_thumb_XY_Bracket_Right_Side.STL | 16.16K |
| 322 | large_thumb_xy_endstop_11mm_spacing.STL | 11.55K |
| 323 | large_thumb_Zaxis_Motor_Mount.STL | 14.58K |
| 324 | large_thumb_Zaxis_Motor_Mount_mirrored.STL | 14.78K |
| 325 | large_thumb_Zaxis_Motor_Mount_supported.STL | 14.55K |
| 326 | large_thumb_Zaxis_Motor_Mount_supported_mirrored.STL | 14.69K |
| 327 | medium_preview_2040_support_bracket.STL | 20.80K |
| 328 | medium_preview_2040_support_bracket_split.STL | 19.76K |
| 329 | medium_preview_60_tooth_Pulley.STL | 23.89K |
| 330 | medium_preview_Back_Lower_Pillow_Bearing.STL | 24.87K |
| 331 | medium_preview_Back_Right_lower.STL | 22.26K |
| 332 | medium_preview_Back_Right_lower_with_brim.STL | 22.81K |
| 333 | medium_preview_Back_Right_upper.STL | 21.53K |
| 334 | medium_preview_Back_Right_upper_with_brim.STL | 19.65K |
| 335 | medium_preview_belts2.jpg | 7.14K |
| 336 | medium_preview_belts3.jpg | 14.76K |
| 337 | medium_preview_belts4.jpg | 14.13K |
| 338 | medium_preview_belts5.jpg | 8.61K |
| 339 | medium_preview_Belt_Attachment_A.STL | 21.86K |
| 340 | medium_preview_Belt_Attachment_B.STL | 23.28K |
| 341 | medium_preview_BLTouch_Mount_for_Main_Extruder.STL | 22.97K |
| 342 | medium_preview_capture1.JPG | 5.79K |
| 343 | medium_preview_capture2.JPG | 8.99K |
| 344 | medium_preview_capture3.JPG | 7.84K |
| 345 | medium_preview_capture4.JPG | 9.02K |
| 346 | medium_preview_capture5.JPG | 10.96K |
| 347 | medium_preview_COMPLETE_Bracketes_and_Spacers.stl | 24.50K |
| 348 | medium_preview_COMPLETE_Extruder_Mount.stl | 23.09K |
| 349 | medium_preview_COMPLETE_XYU.stl | 24.83K |
| 350 | medium_preview_COMPLETE_Z-Axis.stl | 23.00K |
| 351 | medium_preview_Front_Lower_Pillow_Bearing.STL | 25.02K |
| 352 | medium_preview_Front_Right_lower.STL | 23.05K |
| 353 | medium_preview_Front_Right_lower_with_brim.STL | 23.15K |
| 354 | medium_preview_Front_Right_upper.STL | 22.13K |
| 355 | medium_preview_Front_Right_upper_with_brim.STL | 20.00K |
| 356 | medium_preview_IDEX_Belt_Cover.STL | 23.40K |
| 357 | medium_preview_IDEX_Belt_Cover_with_tabs.STL | 24.47K |
| 358 | medium_preview_IDEX_Belt_Mount.STL | 26.61K |
| 359 | medium_preview_IDEX_Detachable_Extruder_Mount.STL | 23.47K |
| 360 | medium_preview_idler_pulley_5mm_ID_z_axis.STL | 23.59K |
| 361 | medium_preview_IMG_20191024_102635_3.jpg | 20.21K |
| 362 | medium_preview_IMG_20191116_193432_4.jpg | 22.00K |
| 363 | medium_preview_kinematics1to1.jpg | 7.54K |
| 364 | medium_preview_Linear_Rod_Support.STL | 23.66K |
| 365 | medium_preview_Linear_Rod_Support_with_endstop.STL | 23.95K |
| 366 | medium_preview_Main_Detachable_Extruder_Mount.STL | 25.19K |
| 367 | medium_preview_Main_Plate_Cover.STL | 23.65K |
| 368 | medium_preview_Main_Plate_Cover_cut_shorter.STL | 23.31K |
| 369 | medium_preview_Middle_Left_lower.STL | 22.13K |
| 370 | medium_preview_Middle_Left_lower_with_brim.STL | 23.10K |
| 371 | medium_preview_Middle_Left_upper.STL | 17.21K |
| 372 | medium_preview_Middle_Left_upper_with_brim.STL | 16.97K |
| 373 | medium_preview_Middle_Lower_Pillow_Bearing.STL | 25.48K |
| 374 | medium_preview_Motor_Mount_IDEX_right_Side.STL | 22.42K |
| 375 | medium_preview_Motor_Mount_left_Side.STL | 21.95K |
| 376 | medium_preview_Motor_Mount_right_Side.STL | 22.17K |
| 377 | medium_preview_Prusa_MK3_Extruder_Plate.STL | 22.74K |
| 378 | medium_preview_Prusa_MK3_Extruder_Plate_mirrored.STL | 24.17K |
| 379 | medium_preview_Prusa_MK3_Extruder_Plate_without_cover.STL | 24.00K |
| 380 | medium_preview_Pulley_cover_IDEX_V2_left_side.STL | 25.54K |
| 381 | medium_preview_Pulley_cover_IDEX_V2_right_side.STL | 23.46K |
| 382 | medium_preview_Pulley_cover_V2_left_side.STL | 24.87K |
| 383 | medium_preview_Pulley_cover_V2_right_side.STL | 21.91K |
| 384 | medium_preview_Pulley_Mount_IDEX_left_side.STL | 22.96K |
| 385 | medium_preview_Pulley_Mount_IDEX_right_side.STL | 23.49K |
| 386 | medium_preview_Pulley_Mount_left_side.STL | 22.96K |
| 387 | medium_preview_Pulley_Mount_right_side.STL | 22.60K |
| 388 | medium_preview_Rear_Support_Plate.STL | 22.58K |
| 389 | medium_preview_XY_Bracket_Left_Side.STL | 24.62K |
| 390 | medium_preview_XY_Bracket_Right_Side.STL | 26.95K |
| 391 | medium_preview_xy_endstop_11mm_spacing.STL | 18.57K |
| 392 | medium_preview_Zaxis_Motor_Mount.STL | 24.48K |
| 393 | medium_preview_Zaxis_Motor_Mount_mirrored.STL | 24.72K |
| 394 | medium_preview_Zaxis_Motor_Mount_supported.STL | 24.38K |
| 395 | medium_preview_Zaxis_Motor_Mount_supported_mirrored.STL | 24.65K |
| 396 | medium_thumb_2040_support_bracket.STL | 5.30K |
| 397 | medium_thumb_2040_support_bracket_split.STL | 5.12K |
| 398 | medium_thumb_60_tooth_Pulley.STL | 6.00K |
| 399 | medium_thumb_Back_Lower_Pillow_Bearing.STL | 6.04K |
| 400 | medium_thumb_Back_Right_lower.STL | 5.56K |
| 401 | medium_thumb_Back_Right_lower_with_brim.STL | 5.45K |
| 402 | medium_thumb_Back_Right_upper.STL | 5.48K |
| 403 | medium_thumb_Back_Right_upper_with_brim.STL | 4.82K |
| 404 | medium_thumb_belts2.jpg | 2.29K |
| 405 | medium_thumb_belts3.jpg | 4.33K |
| 406 | medium_thumb_belts4.jpg | 4.33K |
| 407 | medium_thumb_belts5.jpg | 2.76K |
| 408 | medium_thumb_Belt_Attachment_A.STL | 5.58K |
| 409 | medium_thumb_Belt_Attachment_B.STL | 6.01K |
| 410 | medium_thumb_BLTouch_Mount_for_Main_Extruder.STL | 5.99K |
| 411 | medium_thumb_capture2.JPG | 2.99K |
| 412 | medium_thumb_capture3.JPG | 2.63K |
| 413 | medium_thumb_capture4.JPG | 2.96K |
| 414 | medium_thumb_COMPLETE_Bracketes_and_Spacers.stl | 5.60K |
| 415 | medium_thumb_COMPLETE_Extruder_Mount.stl | 5.16K |
| 416 | medium_thumb_COMPLETE_XYU.stl | 5.55K |
| 417 | medium_thumb_COMPLETE_Z-Axis.stl | 4.66K |
| 418 | medium_thumb_Front_Lower_Pillow_Bearing.STL | 6.16K |
| 419 | medium_thumb_Front_Right_lower.STL | 5.92K |
| 420 | medium_thumb_Front_Right_lower_with_brim.STL | 5.65K |
| 421 | medium_thumb_Front_Right_upper.STL | 5.72K |
| 422 | medium_thumb_Front_Right_upper_with_brim.STL | 5.00K |
| 423 | medium_thumb_IDEX_Belt_Cover.STL | 6.08K |
| 424 | medium_thumb_IDEX_Belt_Cover_with_tabs.STL | 6.55K |
| 425 | medium_thumb_IDEX_Belt_Mount.STL | 7.10K |
| 426 | medium_thumb_IDEX_Detachable_Extruder_Mount.STL | 6.03K |
| 427 | medium_thumb_idler_pulley_5mm_ID_z_axis.STL | 6.46K |
| 428 | medium_thumb_IMG_20191024_102635_3.jpg | 5.38K |
| 429 | medium_thumb_IMG_20191116_193432_4.jpg | 5.58K |
| 430 | medium_thumb_kinematics1to1.jpg | 2.67K |
| 431 | medium_thumb_Linear_Rod_Support.STL | 6.25K |
| 432 | medium_thumb_Linear_Rod_Support_with_endstop.STL | 6.31K |
| 433 | medium_thumb_Main_Detachable_Extruder_Mount.STL | 6.43K |
| 434 | medium_thumb_Main_Plate_Cover.STL | 6.09K |
| 435 | medium_thumb_Main_Plate_Cover_cut_shorter.STL | 6.11K |
| 436 | medium_thumb_Middle_Left_lower.STL | 5.49K |
| 437 | medium_thumb_Middle_Left_lower_with_brim.STL | 5.62K |
| 438 | medium_thumb_Middle_Left_upper.STL | 3.75K |
| 439 | medium_thumb_Middle_Left_upper_with_brim.STL | 3.68K |
| 440 | medium_thumb_Middle_Lower_Pillow_Bearing.STL | 6.27K |
| 441 | medium_thumb_Motor_Mount_IDEX_right_Side.STL | 5.39K |
| 442 | medium_thumb_Motor_Mount_left_Side.STL | 5.38K |
| 443 | medium_thumb_Motor_Mount_right_Side.STL | 5.35K |
| 444 | medium_thumb_Prusa_MK3_Extruder_Plate.STL | 5.91K |
| 445 | medium_thumb_Prusa_MK3_Extruder_Plate_mirrored.STL | 6.29K |
| 446 | medium_thumb_Prusa_MK3_Extruder_Plate_without_cover.STL | 6.25K |
| 447 | medium_thumb_Pulley_cover_IDEX_V2_left_side.STL | 6.33K |
| 448 | medium_thumb_Pulley_cover_IDEX_V2_right_side.STL | 5.78K |
| 449 | medium_thumb_Pulley_cover_V2_left_side.STL | 6.26K |
| 450 | medium_thumb_Pulley_cover_V2_right_side.STL | 5.56K |
| 451 | medium_thumb_Pulley_Mount_IDEX_left_side.STL | 5.70K |
| 452 | medium_thumb_Pulley_Mount_IDEX_right_side.STL | 5.68K |
| 453 | medium_thumb_Pulley_Mount_left_side.STL | 5.70K |
| 454 | medium_thumb_Pulley_Mount_right_side.STL | 5.58K |
| 455 | medium_thumb_Rear_Support_Plate.STL | 5.95K |
| 456 | medium_thumb_XY_Bracket_Left_Side.STL | 6.27K |
| 457 | medium_thumb_XY_Bracket_Right_Side.STL | 6.81K |
| 458 | medium_thumb_xy_endstop_11mm_spacing.STL | 5.16K |
| 459 | medium_thumb_Zaxis_Motor_Mount.STL | 6.25K |
| 460 | medium_thumb_Zaxis_Motor_Mount_mirrored.STL | 6.33K |
| 461 | medium_thumb_Zaxis_Motor_Mount_supported.STL | 6.22K |
| 462 | medium_thumb_Zaxis_Motor_Mount_supported_mirrored.STL | 6.26K |
| 463 | small_display_1.obj | 21.89K |
| 464 | small_display_2D_FISHES.stl | 28.33K |
| 465 | small_display_5.jpg | 12.56K |
| 466 | small_display_accordion_folded_spring_20191111-69-1wii6sq.stl | 30.48K |
| 467 | small_display_Aeronaut_Triple_MPX_connector_conversion_kit.stl | 30.03K |
| 468 | small_display_Ally-scout.stl | 34.57K |
| 469 | small_display_AM2301_Outdoor_Housing_Back.stl | 27.48K |
| 470 | small_display_AM2301_Outdoor_Housing_Front.JPG | 16.39K |
| 471 | small_display_AM2301_Outdoor_Housing_Front.stl | 32.72K |
| 472 | small_display_Ant_2_Autocannon.stl | 24.39K |
| 473 | small_display_Ant_leg_2_with_ID_Pannel.stl | 31.48K |
| 474 | small_display_ant_mk2__turret_peg.stl | 23.21K |
| 475 | small_display_ant_turret_2_machine_guns_1.stl | 25.95K |
| 476 | small_display_bolt_pistol_01.stl | 27.15K |
| 477 | small_display_CF_Toaster_Large_NoWords.stl | 30.93K |
| 478 | small_display_Copy_of_Copy_of_mk_2_ant_turret.stl | 31.93K |
| 479 | small_display_deptOK.stl | 29.77K |
| 480 | small_display_energy_gun_for_ant.stl | 22.96K |
| 481 | small_display_fishes.png | 9.95K |
| 482 | small_display_FrontShot.png | 24.24K |
| 483 | small_display_gear.stl | 24.66K |
| 484 | small_display_growler-lid-container.jpg | 12.08K |
| 485 | small_display_heat_gun.stl | 22.70K |
| 486 | small_display_Hexagon_05-Mount-Body2.stl | 24.79K |
| 487 | small_display_Hull_machine_gun_for_Ant.stl | 22.28K |
| 488 | small_display_IMG_20190906_173841078.jpg | 11.99K |
| 489 | small_display_IMG_20190919_002659980.jpg | 12.72K |
| 490 | small_display_IMG_20191108_140218.jpg | 14.22K |
| 491 | small_display_IMG_20191111_165417.jpg | 16.87K |
| 492 | small_display_Interlocking_Hooks.stl | 30.31K |
| 493 | small_display_keychain_mm_by_ks_20191112-68-16v2nro.stl | 29.02K |
| 494 | small_display_Leg.stl | 31.43K |
| 495 | small_display_makerbot_knob.obj | 28.19K |
| 496 | small_display_MK2_ant_turret_stoage_boxes_with_peg.stl | 31.30K |
| 497 | small_display_MK2_ant_turret_with_peg.stl | 30.49K |
| 498 | small_display_mk_2_ant_turret.stl | 31.03K |
| 499 | small_display_paint_bottle_holder_20191111-56-ohtl9c.stl | 30.56K |
| 500 | small_display_PeanutPiece1Unit12Offset50.stl | 30.11K |
| 501 | small_display_Rev_hub_plate_for_gobilda_strafer_chassis.stl | 19.61K |
| 502 | small_display_round-world.png | 17.32K |
| 503 | small_display_SCAR-Barrel-Bottom.stl | 29.59K |
| 504 | small_display_shaftbuddy_20191112-68-1b8rkgn.stl | 21.48K |
| 505 | small_display_SideShot.png | 10.34K |
| 506 | small_display_SkyHunter_1.8m_fuselage_skid_2.stl | 19.44K |
| 507 | small_display_stunning_gaaris-jaagub.stl | 26.82K |
| 508 | small_display_sweeping_name_plate_vzp_20191111-56-ei57n4.stl | 32.87K |
| 509 | small_display_sweeping_name_plate_vzp_20191112-56-1dkfo7v.stl | 33.46K |
| 510 | small_display_textsign_20191111-56-7ydvmw.stl | 30.00K |
| 511 | small_display_Thunderfire_Cannon_Remix.stl | 36.48K |
| 512 | small_display_Tower_Dice_Base_Landing.stl | 29.82K |
| 513 | small_display_w123_wiper_cover_2.stl | 27.07K |
| 514 | small_preview_2040_support_bracket.STL | 9.30K |
| 515 | small_preview_2040_support_bracket_split.STL | 8.92K |
| 516 | small_preview_60_tooth_Pulley.STL | 10.58K |
| 517 | small_preview_Back_Lower_Pillow_Bearing.STL | 10.97K |
| 518 | small_preview_Back_Right_lower.STL | 9.80K |
| 519 | small_preview_Back_Right_lower_with_brim.STL | 9.94K |
| 520 | small_preview_Back_Right_upper.STL | 9.45K |
| 521 | small_preview_Back_Right_upper_with_brim.STL | 8.53K |
| 522 | small_preview_belts2.jpg | 3.53K |
| 523 | small_preview_belts3.jpg | 7.08K |
| 524 | small_preview_belts4.jpg | 6.86K |
| 525 | small_preview_Belt_Attachment_A.STL | 9.59K |
| 526 | small_preview_Belt_Attachment_B.STL | 10.31K |
| 527 | small_preview_BLTouch_Mount_for_Main_Extruder.STL | 10.49K |
| 528 | small_preview_capture2.JPG | 4.68K |
| 529 | small_preview_capture3.JPG | 3.98K |
| 530 | small_preview_COMPLETE_Bracketes_and_Spacers.stl | 10.40K |
| 531 | small_preview_COMPLETE_Extruder_Mount.stl | 9.75K |
| 532 | small_preview_COMPLETE_XYU.stl | 10.49K |
| 533 | small_preview_COMPLETE_Z-Axis.stl | 9.36K |
| 534 | small_preview_Front_Lower_Pillow_Bearing.STL | 11.08K |
| 535 | small_preview_Front_Right_lower.STL | 10.34K |
| 536 | small_preview_Front_Right_lower_with_brim.STL | 10.27K |
| 537 | small_preview_Front_Right_upper.STL | 9.91K |
| 538 | small_preview_Front_Right_upper_with_brim.STL | 8.80K |
| 539 | small_preview_IDEX_Belt_Cover.STL | 10.42K |
| 540 | small_preview_IDEX_Belt_Cover_with_tabs.STL | 11.21K |
| 541 | small_preview_IDEX_Belt_Mount.STL | 12.27K |
| 542 | small_preview_IDEX_Detachable_Extruder_Mount.STL | 10.39K |
| 543 | small_preview_idler_pulley_5mm_ID_z_axis.STL | 11.11K |
| 544 | small_preview_IMG_20191024_102635_3.jpg | 9.39K |
| 545 | small_preview_IMG_20191116_193432_4.jpg | 10.10K |
| 546 | small_preview_Linear_Rod_Support.STL | 10.88K |
| 547 | small_preview_Linear_Rod_Support_with_endstop.STL | 10.98K |
| 548 | small_preview_Main_Detachable_Extruder_Mount.STL | 11.10K |
| 549 | small_preview_Main_Plate_Cover.STL | 10.55K |
| 550 | small_preview_Main_Plate_Cover_cut_shorter.STL | 10.53K |
| 551 | small_preview_Middle_Left_lower.STL | 9.74K |
| 552 | small_preview_Middle_Left_lower_with_brim.STL | 10.06K |
| 553 | small_preview_Middle_Left_upper.STL | 7.13K |
| 554 | small_preview_Middle_Left_upper_with_brim.STL | 7.05K |
| 555 | small_preview_Middle_Lower_Pillow_Bearing.STL | 11.25K |
| 556 | small_preview_Motor_Mount_IDEX_right_Side.STL | 9.59K |
| 557 | small_preview_Motor_Mount_left_Side.STL | 9.62K |
| 558 | small_preview_Motor_Mount_right_Side.STL | 9.64K |
| 559 | small_preview_Prusa_MK3_Extruder_Plate.STL | 10.12K |
| 560 | small_preview_Prusa_MK3_Extruder_Plate_mirrored.STL | 10.82K |
| 561 | small_preview_Prusa_MK3_Extruder_Plate_without_cover.STL | 10.72K |
| 562 | small_preview_Pulley_cover_IDEX_V2_left_side.STL | 11.30K |
| 563 | small_preview_Pulley_cover_IDEX_V2_right_side.STL | 10.25K |
| 564 | small_preview_Pulley_cover_V2_left_side.STL | 11.07K |
| 565 | small_preview_Pulley_cover_V2_right_side.STL | 9.71K |
| 566 | small_preview_Pulley_Mount_IDEX_left_side.STL | 10.14K |
| 567 | small_preview_Pulley_Mount_IDEX_right_side.STL | 10.18K |
| 568 | small_preview_Pulley_Mount_left_side.STL | 10.14K |
| 569 | small_preview_Pulley_Mount_right_side.STL | 9.89K |
| 570 | small_preview_Rear_Support_Plate.STL | 10.16K |
| 571 | small_preview_XY_Bracket_Left_Side.STL | 10.96K |
| 572 | small_preview_XY_Bracket_Right_Side.STL | 12.01K |
| 573 | small_preview_xy_endstop_11mm_spacing.STL | 8.63K |
| 574 | small_preview_Zaxis_Motor_Mount.STL | 11.03K |
| 575 | small_preview_Zaxis_Motor_Mount_mirrored.STL | 11.13K |
| 576 | small_preview_Zaxis_Motor_Mount_supported.STL | 11.02K |
| 577 | small_preview_Zaxis_Motor_Mount_supported_mirrored.STL | 11.03K |
| 578 | small_thumb_2040_support_bracket.STL | 2.74K |
| 579 | small_thumb_2040_support_bracket_split.STL | 2.70K |
| 580 | small_thumb_60_tooth_Pulley.STL | 3.02K |
| 581 | small_thumb_Back_Lower_Pillow_Bearing.STL | 3.10K |
| 582 | small_thumb_Back_Right_lower.STL | 2.88K |
| 583 | small_thumb_Back_Right_lower_with_brim.STL | 2.70K |
| 584 | small_thumb_Back_Right_upper.STL | 2.78K |
| 585 | small_thumb_Back_Right_upper_with_brim.STL | 2.42K |
| 586 | small_thumb_belts2.jpg | 1.49K |
| 587 | small_thumb_belts3.jpg | 2.67K |
| 588 | small_thumb_belts4.jpg | 2.77K |
| 589 | small_thumb_belts5.jpg | 1.81K |
| 590 | small_thumb_Belt_Attachment_A.STL | 2.96K |
| 591 | small_thumb_Belt_Attachment_B.STL | 3.17K |
| 592 | small_thumb_BLTouch_Mount_for_Main_Extruder.STL | 3.10K |
| 593 | small_thumb_capture2.JPG | 1.97K |
| 594 | small_thumb_capture3.JPG | 1.72K |
| 595 | small_thumb_capture4.JPG | 1.95K |
| 596 | small_thumb_capture5.JPG | 2.34K |
| 597 | small_thumb_COMPLETE_Bracketes_and_Spacers.stl | 2.68K |
| 598 | small_thumb_COMPLETE_Extruder_Mount.stl | 2.33K |
| 599 | small_thumb_COMPLETE_XYU.stl | 2.60K |
| 600 | small_thumb_COMPLETE_Z-Axis.stl | 2.30K |
| 601 | small_thumb_Front_Lower_Pillow_Bearing.STL | 3.15K |
| 602 | small_thumb_Front_Right_lower.STL | 3.01K |
| 603 | small_thumb_Front_Right_lower_with_brim.STL | 2.75K |
| 604 | small_thumb_Front_Right_upper.STL | 2.95K |
| 605 | small_thumb_Front_Right_upper_with_brim.STL | 2.42K |
| 606 | small_thumb_IDEX_Belt_Cover.STL | 3.17K |
| 607 | small_thumb_IDEX_Belt_Cover_with_tabs.STL | 3.41K |
| 608 | small_thumb_IDEX_Belt_Mount.STL | 3.78K |
| 609 | small_thumb_IDEX_Detachable_Extruder_Mount.STL | 3.08K |
| 610 | small_thumb_idler_pulley_5mm_ID_z_axis.STL | 3.37K |
| 611 | small_thumb_IMG_20191024_102635_3.jpg | 3.20K |
| 612 | small_thumb_IMG_20191116_193432_4.jpg | 3.17K |
| 613 | small_thumb_kinematics1to1.jpg | 1.64K |
| 614 | small_thumb_Linear_Rod_Support.STL | 3.27K |
| 615 | small_thumb_Linear_Rod_Support_with_endstop.STL | 3.28K |
| 616 | small_thumb_Main_Detachable_Extruder_Mount.STL | 3.27K |
| 617 | small_thumb_Main_Plate_Cover.STL | 3.17K |
| 618 | small_thumb_Main_Plate_Cover_cut_shorter.STL | 3.11K |
| 619 | small_thumb_Middle_Left_lower.STL | 2.77K |
| 620 | small_thumb_Middle_Left_lower_with_brim.STL | 2.79K |
| 621 | small_thumb_Middle_Left_upper.STL | 1.85K |
| 622 | small_thumb_Middle_Left_upper_with_brim.STL | 1.88K |
| 623 | small_thumb_Middle_Lower_Pillow_Bearing.STL | 3.21K |
| 624 | small_thumb_Motor_Mount_IDEX_right_Side.STL | 2.66K |
| 625 | small_thumb_Motor_Mount_left_Side.STL | 2.70K |
| 626 | small_thumb_Motor_Mount_right_Side.STL | 2.69K |
| 627 | small_thumb_Prusa_MK3_Extruder_Plate.STL | 3.00K |
| 628 | small_thumb_Prusa_MK3_Extruder_Plate_mirrored.STL | 3.15K |
| 629 | small_thumb_Prusa_MK3_Extruder_Plate_without_cover.STL | 3.18K |
| 630 | small_thumb_Pulley_cover_IDEX_V2_left_side.STL | 3.22K |
| 631 | small_thumb_Pulley_cover_IDEX_V2_right_side.STL | 2.92K |
| 632 | small_thumb_Pulley_cover_V2_left_side.STL | 3.20K |
| 633 | small_thumb_Pulley_cover_V2_right_side.STL | 2.85K |
| 634 | small_thumb_Pulley_Mount_IDEX_left_side.STL | 2.86K |
| 635 | small_thumb_Pulley_Mount_IDEX_right_side.STL | 2.77K |
| 636 | small_thumb_Pulley_Mount_left_side.STL | 2.86K |
| 637 | small_thumb_Pulley_Mount_right_side.STL | 2.74K |
| 638 | small_thumb_Rear_Support_Plate.STL | 2.98K |
| 639 | small_thumb_XY_Bracket_Left_Side.STL | 3.20K |
| 640 | small_thumb_XY_Bracket_Right_Side.STL | 3.41K |
| 641 | small_thumb_xy_endstop_11mm_spacing.STL | 2.74K |
| 642 | small_thumb_Zaxis_Motor_Mount.STL | 3.28K |
| 643 | small_thumb_Zaxis_Motor_Mount_mirrored.STL | 3.33K |
| 644 | small_thumb_Zaxis_Motor_Mount_supported.STL | 3.25K |
| 645 | small_thumb_Zaxis_Motor_Mount_supported_mirrored.STL | 3.30K |
| 646 | tinycard_preview_2040_support_bracket.STL | 2.41K |
| 647 | tinycard_preview_2040_support_bracket_split.STL | 2.32K |
| 648 | tinycard_preview_60_tooth_Pulley.STL | 2.55K |
| 649 | tinycard_preview_Back_Lower_Pillow_Bearing.STL | 2.77K |
| 650 | tinycard_preview_Back_Right_lower.STL | 2.55K |
| 651 | tinycard_preview_Back_Right_lower_with_brim.STL | 2.38K |
| 652 | tinycard_preview_Back_Right_upper.STL | 2.45K |
| 653 | tinycard_preview_Back_Right_upper_with_brim.STL | 2.12K |
| 654 | tinycard_preview_belts3.jpg | 2.33K |
| 655 | tinycard_preview_belts5.jpg | 1.75K |
| 656 | tinycard_preview_Belt_Attachment_A.STL | 2.58K |
| 657 | tinycard_preview_Belt_Attachment_B.STL | 2.71K |
| 658 | tinycard_preview_BLTouch_Mount_for_Main_Extruder.STL | 2.71K |
| 659 | tinycard_preview_capture1.JPG | 1.45K |
| 660 | tinycard_preview_capture2.JPG | 1.79K |
| 661 | tinycard_preview_capture3.JPG | 1.62K |
| 662 | tinycard_preview_capture4.JPG | 1.81K |
| 663 | tinycard_preview_capture5.JPG | 2.17K |
| 664 | tinycard_preview_COMPLETE_Bracketes_and_Spacers.stl | 2.36K |
| 665 | tinycard_preview_COMPLETE_Extruder_Mount.stl | 2.01K |
| 666 | tinycard_preview_COMPLETE_XYU.stl | 2.35K |
| 667 | tinycard_preview_COMPLETE_Z-Axis.stl | 2.05K |
| 668 | tinycard_preview_Front_Lower_Pillow_Bearing.STL | 2.83K |
| 669 | tinycard_preview_Front_Right_lower.STL | 2.70K |
| 670 | tinycard_preview_Front_Right_lower_with_brim.STL | 2.47K |
| 671 | tinycard_preview_Front_Right_upper.STL | 2.60K |
| 672 | tinycard_preview_Front_Right_upper_with_brim.STL | 2.17K |
| 673 | tinycard_preview_IDEX_Belt_Cover.STL | 2.75K |
| 674 | tinycard_preview_IDEX_Belt_Cover_with_tabs.STL | 2.93K |
| 675 | tinycard_preview_IDEX_Belt_Mount.STL | 3.35K |
| 676 | tinycard_preview_IDEX_Detachable_Extruder_Mount.STL | 2.64K |
| 677 | tinycard_preview_idler_pulley_5mm_ID_z_axis.STL | 2.91K |
| 678 | tinycard_preview_IMG_20191024_102635_3.jpg | 2.79K |
| 679 | tinycard_preview_IMG_20191116_193432_4.jpg | 2.78K |
| 680 | tinycard_preview_kinematics1to1.jpg | 1.57K |
| 681 | tinycard_preview_Linear_Rod_Support.STL | 2.87K |
| 682 | tinycard_preview_Linear_Rod_Support_with_endstop.STL | 2.91K |
| 683 | tinycard_preview_Main_Detachable_Extruder_Mount.STL | 2.81K |
| 684 | tinycard_preview_Main_Plate_Cover.STL | 2.75K |
| 685 | tinycard_preview_Main_Plate_Cover_cut_shorter.STL | 2.70K |
| 686 | tinycard_preview_Middle_Left_lower.STL | 2.47K |
| 687 | tinycard_preview_Middle_Left_lower_with_brim.STL | 2.48K |
| 688 | tinycard_preview_Middle_Left_upper.STL | 1.65K |
| 689 | tinycard_preview_Middle_Left_upper_with_brim.STL | 1.66K |
| 690 | tinycard_preview_Middle_Lower_Pillow_Bearing.STL | 2.88K |
| 691 | tinycard_preview_Motor_Mount_IDEX_right_Side.STL | 2.32K |
| 692 | tinycard_preview_Motor_Mount_left_Side.STL | 2.33K |
| 693 | tinycard_preview_Motor_Mount_right_Side.STL | 2.30K |
| 694 | tinycard_preview_Prusa_MK3_Extruder_Plate.STL | 2.54K |
| 695 | tinycard_preview_Prusa_MK3_Extruder_Plate_mirrored.STL | 2.72K |
| 696 | tinycard_preview_Prusa_MK3_Extruder_Plate_without_cover.STL | 2.71K |
| 697 | tinycard_preview_Pulley_cover_IDEX_V2_left_side.STL | 2.83K |
| 698 | tinycard_preview_Pulley_cover_IDEX_V2_right_side.STL | 2.58K |
| 699 | tinycard_preview_Pulley_cover_V2_left_side.STL | 2.75K |
| 700 | tinycard_preview_Pulley_cover_V2_right_side.STL | 2.48K |
| 701 | tinycard_preview_Pulley_Mount_IDEX_left_side.STL | 2.50K |
| 702 | tinycard_preview_Pulley_Mount_IDEX_right_side.STL | 2.39K |
| 703 | tinycard_preview_Pulley_Mount_left_side.STL | 2.50K |
| 704 | tinycard_preview_Pulley_Mount_right_side.STL | 2.37K |
| 705 | tinycard_preview_Rear_Support_Plate.STL | 2.50K |
| 706 | tinycard_preview_XY_Bracket_Left_Side.STL | 2.77K |
| 707 | tinycard_preview_XY_Bracket_Right_Side.STL | 2.93K |
| 708 | tinycard_preview_xy_endstop_11mm_spacing.STL | 2.31K |
| 709 | tinycard_preview_Zaxis_Motor_Mount.STL | 2.94K |
| 710 | tinycard_preview_Zaxis_Motor_Mount_mirrored.STL | 2.98K |
| 711 | tinycard_preview_Zaxis_Motor_Mount_supported.STL | 2.93K |
| 712 | tinycard_preview_Zaxis_Motor_Mount_supported_mirrored.STL | 2.95K |
| 713 | tiny_preview_2040_support_bracket.STL | 7.34K |
| 714 | tiny_preview_2040_support_bracket_split.STL | 7.07K |
| 715 | tiny_preview_60_tooth_Pulley.STL | 8.30K |
| 716 | tiny_preview_Back_Lower_Pillow_Bearing.STL | 8.69K |
| 717 | tiny_preview_Back_Right_lower.STL | 7.81K |
| 718 | tiny_preview_Back_Right_lower_with_brim.STL | 7.83K |
| 719 | tiny_preview_Back_Right_upper.STL | 7.51K |
| 720 | tiny_preview_Back_Right_upper_with_brim.STL | 6.74K |
| 721 | tiny_preview_belts2.jpg | 3.04K |
| 722 | tiny_preview_belts3.jpg | 5.63K |
| 723 | tiny_preview_belts4.jpg | 5.44K |
| 724 | tiny_preview_belts5.jpg | 3.83K |
| 725 | tiny_preview_Belt_Attachment_A.STL | 7.61K |
| 726 | tiny_preview_Belt_Attachment_B.STL | 8.20K |
| 727 | tiny_preview_BLTouch_Mount_for_Main_Extruder.STL | 8.33K |
| 728 | tiny_preview_capture1.JPG | 2.74K |
| 729 | tiny_preview_capture2.JPG | 3.87K |
| 730 | tiny_preview_capture3.JPG | 3.34K |
| 731 | tiny_preview_capture4.JPG | 3.81K |
| 732 | tiny_preview_COMPLETE_Bracketes_and_Spacers.stl | 8.16K |
| 733 | tiny_preview_COMPLETE_Extruder_Mount.stl | 7.41K |
| 734 | tiny_preview_COMPLETE_XYU.stl | 8.19K |
| 735 | tiny_preview_COMPLETE_Z-Axis.stl | 7.22K |
| 736 | tiny_preview_Front_Lower_Pillow_Bearing.STL | 8.79K |
| 737 | tiny_preview_Front_Right_lower.STL | 8.28K |
| 738 | tiny_preview_Front_Right_lower_with_brim.STL | 8.01K |
| 739 | tiny_preview_Front_Right_upper.STL | 7.94K |
| 740 | tiny_preview_Front_Right_upper_with_brim.STL | 6.99K |
| 741 | tiny_preview_IDEX_Belt_Cover.STL | 8.33K |
| 742 | tiny_preview_IDEX_Belt_Cover_with_tabs.STL | 8.93K |
| 743 | tiny_preview_IDEX_Belt_Mount.STL | 9.92K |
| 744 | tiny_preview_IDEX_Detachable_Extruder_Mount.STL | 8.27K |
| 745 | tiny_preview_idler_pulley_5mm_ID_z_axis.STL | 8.89K |
| 746 | tiny_preview_IMG_20191024_102635_3.jpg | 7.30K |
| 747 | tiny_preview_IMG_20191116_193432_4.jpg | 7.85K |
| 748 | tiny_preview_kinematics1to1.jpg | 3.34K |
| 749 | tiny_preview_Linear_Rod_Support.STL | 8.63K |
| 750 | tiny_preview_Linear_Rod_Support_with_endstop.STL | 8.71K |
| 751 | tiny_preview_Main_Detachable_Extruder_Mount.STL | 8.84K |
| 752 | tiny_preview_Main_Plate_Cover.STL | 8.42K |
| 753 | tiny_preview_Main_Plate_Cover_cut_shorter.STL | 8.41K |
| 754 | tiny_preview_Middle_Left_lower.STL | 7.73K |
| 755 | tiny_preview_Middle_Left_lower_with_brim.STL | 8.00K |
| 756 | tiny_preview_Middle_Left_upper.STL | 5.48K |
| 757 | tiny_preview_Middle_Left_upper_with_brim.STL | 5.41K |
| 758 | tiny_preview_Middle_Lower_Pillow_Bearing.STL | 8.99K |
| 759 | tiny_preview_Motor_Mount_IDEX_right_Side.STL | 7.58K |
| 760 | tiny_preview_Motor_Mount_left_Side.STL | 7.57K |
| 761 | tiny_preview_Motor_Mount_right_Side.STL | 7.56K |
| 762 | tiny_preview_Prusa_MK3_Extruder_Plate.STL | 8.04K |
| 763 | tiny_preview_Prusa_MK3_Extruder_Plate_mirrored.STL | 8.56K |
| 764 | tiny_preview_Prusa_MK3_Extruder_Plate_without_cover.STL | 8.43K |
| 765 | tiny_preview_Pulley_cover_IDEX_V2_left_side.STL | 8.90K |
| 766 | tiny_preview_Pulley_cover_IDEX_V2_right_side.STL | 8.00K |
| 767 | tiny_preview_Pulley_cover_V2_left_side.STL | 8.77K |
| 768 | tiny_preview_Pulley_cover_V2_right_side.STL | 7.70K |
| 769 | tiny_preview_Pulley_Mount_IDEX_left_side.STL | 7.96K |
| 770 | tiny_preview_Pulley_Mount_IDEX_right_side.STL | 7.99K |
| 771 | tiny_preview_Pulley_Mount_left_side.STL | 7.96K |
| 772 | tiny_preview_Pulley_Mount_right_side.STL | 7.71K |
| 773 | tiny_preview_Rear_Support_Plate.STL | 8.06K |
| 774 | tiny_preview_XY_Bracket_Left_Side.STL | 8.68K |
| 775 | tiny_preview_XY_Bracket_Right_Side.STL | 9.47K |
| 776 | tiny_preview_xy_endstop_11mm_spacing.STL | 6.89K |
| 777 | tiny_preview_Zaxis_Motor_Mount.STL | 8.81K |
| 778 | tiny_preview_Zaxis_Motor_Mount_mirrored.STL | 8.92K |
| 779 | tiny_preview_Zaxis_Motor_Mount_supported.STL | 8.78K |
| 780 | tiny_preview_Zaxis_Motor_Mount_supported_mirrored.STL | 8.84K |
| 781 | tiny_thumb_2040_support_bracket.STL | 1.65K |
| 782 | tiny_thumb_2040_support_bracket_split.STL | 1.59K |
| 783 | tiny_thumb_60_tooth_Pulley.STL | 1.75K |
| 784 | tiny_thumb_Back_Lower_Pillow_Bearing.STL | 1.84K |
| 785 | tiny_thumb_Back_Right_lower.STL | 1.71K |
| 786 | tiny_thumb_Back_Right_lower_with_brim.STL | 1.60K |
| 787 | tiny_thumb_Back_Right_upper.STL | 1.66K |
| 788 | tiny_thumb_Back_Right_upper_with_brim.STL | 1.45K |
| 789 | tiny_thumb_belts2.jpg | 1.22K |
| 790 | tiny_thumb_belts3.jpg | 1.85K |
| 791 | tiny_thumb_belts4.jpg | 1.92K |
| 792 | tiny_thumb_belts5.jpg | 1.41K |
| 793 | tiny_thumb_Belt_Attachment_A.STL | 1.77K |
| 794 | tiny_thumb_Belt_Attachment_B.STL | 1.86K |
| 795 | tiny_thumb_BLTouch_Mount_for_Main_Extruder.STL | 1.85K |
| 796 | tiny_thumb_capture1.JPG | 1.19K |
| 797 | tiny_thumb_capture2.JPG | 1.41K |
| 798 | tiny_thumb_capture3.JPG | 1.35K |
| 799 | tiny_thumb_capture4.JPG | 1.47K |
| 800 | tiny_thumb_capture5.JPG | 1.72K |
| 801 | tiny_thumb_COMPLETE_Bracketes_and_Spacers.stl | 1.49K |
| 802 | tiny_thumb_COMPLETE_Extruder_Mount.stl | 1.30K |
| 803 | tiny_thumb_COMPLETE_XYU.stl | 1.52K |
| 804 | tiny_thumb_COMPLETE_Z-Axis.stl | 1.37K |
| 805 | tiny_thumb_Front_Lower_Pillow_Bearing.STL | 1.85K |
| 806 | tiny_thumb_Front_Right_lower.STL | 1.78K |
| 807 | tiny_thumb_Front_Right_lower_with_brim.STL | 1.65K |
| 808 | tiny_thumb_Front_Right_upper.STL | 1.74K |
| 809 | tiny_thumb_Front_Right_upper_with_brim.STL | 1.49K |
| 810 | tiny_thumb_IDEX_Belt_Cover.STL | 1.87K |
| 811 | tiny_thumb_IDEX_Belt_Cover_with_tabs.STL | 2.00K |
| 812 | tiny_thumb_IDEX_Belt_Mount.STL | 2.26K |
| 813 | tiny_thumb_IDEX_Detachable_Extruder_Mount.STL | 1.78K |
| 814 | tiny_thumb_idler_pulley_5mm_ID_z_axis.STL | 1.95K |
| 815 | tiny_thumb_IMG_20191024_102635_3.jpg | 2.13K |
| 816 | tiny_thumb_IMG_20191116_193432_4.jpg | 2.09K |
| 817 | tiny_thumb_kinematics1to1.jpg | 1.33K |
| 818 | tiny_thumb_Linear_Rod_Support.STL | 1.99K |
| 819 | tiny_thumb_Linear_Rod_Support_with_endstop.STL | 1.99K |
| 820 | tiny_thumb_Main_Detachable_Extruder_Mount.STL | 1.88K |
| 821 | tiny_thumb_Main_Plate_Cover.STL | 1.83K |
| 822 | tiny_thumb_Main_Plate_Cover_cut_shorter.STL | 1.82K |
| 823 | tiny_thumb_Middle_Left_lower.STL | 1.68K |
| 824 | tiny_thumb_Middle_Left_lower_with_brim.STL | 1.65K |
| 825 | tiny_thumb_Middle_Left_upper.STL | 1.19K |
| 826 | tiny_thumb_Middle_Left_upper_with_brim.STL | 1.21K |
| 827 | tiny_thumb_Middle_Lower_Pillow_Bearing.STL | 1.90K |
| 828 | tiny_thumb_Motor_Mount_IDEX_right_Side.STL | 1.57K |
| 829 | tiny_thumb_Motor_Mount_left_Side.STL | 1.56K |
| 830 | tiny_thumb_Motor_Mount_right_Side.STL | 1.52K |
| 831 | tiny_thumb_Prusa_MK3_Extruder_Plate.STL | 1.73K |
| 832 | tiny_thumb_Prusa_MK3_Extruder_Plate_mirrored.STL | 1.81K |
| 833 | tiny_thumb_Prusa_MK3_Extruder_Plate_without_cover.STL | 1.83K |
| 834 | tiny_thumb_Pulley_cover_IDEX_V2_left_side.STL | 1.89K |
| 835 | tiny_thumb_Pulley_cover_IDEX_V2_right_side.STL | 1.71K |
| 836 | tiny_thumb_Pulley_cover_V2_left_side.STL | 1.89K |
| 837 | tiny_thumb_Pulley_cover_V2_right_side.STL | 1.72K |
| 838 | tiny_thumb_Pulley_Mount_IDEX_left_side.STL | 1.68K |
| 839 | tiny_thumb_Pulley_Mount_IDEX_right_side.STL | 1.59K |
| 840 | tiny_thumb_Pulley_Mount_left_side.STL | 1.68K |
| 841 | tiny_thumb_Pulley_Mount_right_side.STL | 1.57K |
| 842 | tiny_thumb_Rear_Support_Plate.STL | 1.71K |
| 843 | tiny_thumb_XY_Bracket_Left_Side.STL | 1.86K |
| 844 | tiny_thumb_XY_Bracket_Right_Side.STL | 1.95K |
| 845 | tiny_thumb_xy_endstop_11mm_spacing.STL | 1.62K |
| 846 | tiny_thumb_Zaxis_Motor_Mount.STL | 1.95K |
| 847 | tiny_thumb_Zaxis_Motor_Mount_mirrored.STL | 2.02K |
| 848 | tiny_thumb_Zaxis_Motor_Mount_supported.STL | 1.96K |
| 849 | tiny_thumb_Zaxis_Motor_Mount_supported_mirrored.STL | 1.98K |
免费下载
发布者
眼睛大的猫咪
创作: 160254
粉丝: 1275
加入时间：2022-08-18
模型信息
图纸格式：stl,pdf,step
文件大小：54.97M
所需金币：0
上传时间：2020-12-16 02:12:51
是否可编辑：可修改，包括参数
版本：STEP
标签
图纸简介
版权说明
用户在本站上传的作品如侵犯到您的权益，请与本站管理员联系删除。用户在本站下载的原创作品，只拥有作品的使用权，著作权归原作者所有，未经合法授权，用户不得以任何形式发布、传播、复制、转售该作品。
作者其它图纸 查看更多
0.jpg)
![0_[教程]SOLIWORKS混血器莱迪思花瓶](https://html.lazystones.com/html/100077/bigpic/309258/de691244-fd3f-486a-8aa7-e53619256573原图(主)0.jpg)
0.jpg)
0.jpg)
0.jpg)
0.jpg)
0.jpg)
0.jpg)
猜你喜欢
0_0_364.jpg)
0.jpg)
0.png)
0.png)
0.jpg)
0.png)
0.png)
1.png)
0_0_364.png)
0_0_364.png)
0.png)
0.png)
0.png)
QQ在线客服
官方QQ群
