登录注册
微信扫码登录
雷普拉普门德尔（ID:219619）
3.jpg)
2.jpg)
1.jpg)
0.jpg)
4.jpg)
| # | 文件名称 | 文件大小 |
|---|---|---|
| 1 | 12mm thick ridged belt adjuster.ipt | 87.50K |
| 2 | 21-T5_10-2_Mekanex pully.ipt | 199.50K |
| 3 | 21-T5_10-2_Mekanex.ipt | 214.00K |
| 4 | 340mm M8 rod.ipt | 67.00K |
| 5 | 350mm smooth rods (Z).ipt | 63.50K |
| 6 | 400mm smooth rods (Y).ipt | 62.00K |
| 7 | 450mm smooth 8mm rods (X).ipt | 63.00K |
| 8 | 470mm M8 rods.ipt | 66.00K |
| 9 | 4mm thick ridged belt clamp.ipt | 84.50K |
| 10 | Assembly1.iam | 62.00K |
| 11 | ANSI_IFI 535 - M3x0.5 x 40(1).ipt | 173.00K |
| 12 | ANSI_IFI 535 - M3x0.5 x 50(1).ipt | 166.50K |
| 13 | ASME B18.6.3 - 3-56.ipt | 176.00K |
| 14 | ASME_ANSI B18.3.5M - M3x30(2).ipt | 189.00K |
| 15 | 重复_Assembly1.iam | 69.50K |
| 16 | WD_BEARINGS_LM_8UU.0003.iam | 74.50K |
| 17 | WD_BEARINGS_LM_8UU_Ball.0003.ipt | 132.50K |
| 18 | WD_BEARINGS_LM_8UU_Cage.0003.ipt | 168.00K |
| 19 | WD_BEARINGS_LM_8UU_Inner_ring.0002.ipt | 93.50K |
| 20 | WD_BEARINGS_LM_8UU_Inner_ring.0003.ipt | 94.00K |
| 21 | WD_BEARINGS_LM_8UU_Outer_ring.0002.ipt | 145.00K |
| 22 | WD_BEARINGS_LM_8UU_Outer_ring.0003.ipt | 145.50K |
| 23 | PARTserver54936389.zip | 433.37K |
| 24 | readme-and-terms-of-use-3d-cad-models.txt | 10.70K |
| 25 | WD_BEARINGS_LM_8UU.iam | 78.50K |
| 26 | WD_BEARINGS_LM_8UU_Ball.ipt | 133.00K |
| 27 | WD_BEARINGS_LM_8UU_Cage.ipt | 171.00K |
| 28 | WD_BEARINGS_LM_8UU_Inner_ring.ipt | 95.00K |
| 29 | WD_BEARINGS_LM_8UU_Outer_ring.ipt | 147.00K |
| 30 | bearing holder 02.ipt | 83.00K |
| 31 | bearing holders.ipt | 211.50K |
| 32 | 重复_belt clamp.ipt | 84.00K |
| 33 | belt guide.ipt | 96.00K |
| 34 | Bushe GB_T 12949-2003 8 X 10 X 6.ipt | 144.50K |
| 35 | carriage lid.ipt | 604.00K |
| 36 | carriage plate.ipt | 731.00K |
| 37 | carriage plate02.ipt | 701.50K |
| 38 | cooling system.iam | 72.00K |
| 39 | DIN 125 - A 3.2.ipt | 107.00K |
| 40 | DIN 125 - A 8.4.ipt | 107.50K |
| 41 | DIN 439 - M3 x 0.5.ipt | 162.00K |
| 42 | DIN 555-5 - M6.ipt | 159.00K |
| 43 | DIN 7985 (H) - M3x12-H.ipt | 235.50K |
| 44 | DIN 7991 - M3x30.ipt | 175.50K |
| 45 | DIN 913 - M3 x 10.ipt | 161.00K |
| 46 | DIN 963 - M3 x 8.ipt | 172.50K |
| 47 | PARTserver55656390.zip | 514.88K |
| 48 | 重复_readme-and-terms-of-use-3d-cad-models.txt | 9.27K |
| 49 | Z50_Corto.ipt | 669.50K |
| 50 | Driving_gear_D_48.ipt | 813.50K |
| 51 | PARTserver55665676.zip | 623.49K |
| 52 | 重复_readme-and-terms-of-use-3d-cad-models.txt | 9.34K |
| 53 | extroder -02.ipt | 165.50K |
| 54 | Compress Spring1.iam | 63.00K |
| 55 | Compress Spring11.ipt | 858.00K |
| 56 | Compress Spring12.ipt | 858.00K |
| 57 | Compress Spring2.iam | 42.50K |
| 58 | Compress Spring1.0002.iam | 62.00K |
| 59 | Compress Spring11.0002.ipt | 854.50K |
| 60 | Compress Spring12.0002.ipt | 854.50K |
| 61 | Compress Spring2.0002.iam | 41.50K |
| 62 | Spur Gear12.0005.ipt | 249.00K |
| 63 | Spur Gear22.0004.ipt | 435.50K |
| 64 | Spur Gears2.0005.iam | 60.00K |
| 65 | Spur Gear11.ipt | 191.50K |
| 66 | Spur Gear12.ipt | 249.50K |
| 67 | Spur Gear21.ipt | 347.50K |
| 68 | Spur Gear22.ipt | 436.50K |
| 69 | Spur Gears1.iam | 59.00K |
| 70 | Spur Gears2.iam | 65.50K |
| 71 | extroder driver plate.ipt | 378.00K |
| 72 | extroder driver.iam | 203.50K |
| 73 | extroder holder.ipt | 107.00K |
| 74 | Arrow2.ipt | 154.50K |
| 75 | MU825S_13_100_.iam | 140.00K |
| 76 | MU825S_13_100__part.ipt | 385.50K |
| 77 | PARTserver55743920.zip | 340.22K |
| 78 | 重复_readme-and-terms-of-use-3d-cad-models.txt | 9.82K |
| 79 | Arrow1.ipt | 74.00K |
| 80 | MDS410_24.iam | 57.00K |
| 81 | MDS410_24_part.ipt | 270.00K |
| 82 | Arrow1.0001.ipt | 154.50K |
| 83 | MDS410_24.0005.iam | 55.00K |
| 84 | MDS410_24_part.0004.ipt | 268.00K |
| 85 | PARTserver55744350.zip | 232.59K |
| 86 | 重复_readme-and-terms-of-use-3d-cad-models.txt | 9.70K |
| 87 | 重复_Arrow1.ipt | 154.50K |
| 88 | MDS625H_24.iam | 140.00K |
| 89 | MDS625H_24_part.ipt | 474.50K |
| 90 | PARTserver55746033.zip | 426.02K |
| 91 | 重复_readme-and-terms-of-use-3d-cad-models.txt | 9.72K |
| 92 | 重复_Arrow1.ipt | 154.50K |
| 93 | MDS510_12L.iam | 140.50K |
| 94 | MDS510_12L_part.ipt | 262.00K |
| 95 | PARTserver55746673.zip | 218.38K |
| 96 | 重复_readme-and-terms-of-use-3d-cad-models.txt | 9.72K |
| 97 | fram-01.iam | 118.50K |
| 98 | fram-02.iam | 72.50K |
| 99 | fram-03.iam | 77.00K |
| 100 | fram-05.iam | 70.50K |
| 101 | fram-06.iam | 76.00K |
| 102 | fram-07.iam | 57.00K |
| 103 | fram-08.iam | 55.00K |
| 104 | fram_04.iam | 70.00K |
| 105 | PARTserver55665872.zip | 78.32K |
| 106 | 重复_readme-and-terms-of-use-3d-cad-models.txt | 9.25K |
| 107 | SN1_30L.ipt | 182.50K |
| 108 | PARTserver55666399.zip | 62.38K |
| 109 | PSA2_85_J22.ipt | 171.00K |
| 110 | 重复_readme-and-terms-of-use-3d-cad-models.txt | 9.29K |
| 111 | GE_2048.ipt | 878.50K |
| 112 | GE_2048.0001.ipt | 951.00K |
| 113 | PARTserver55666477.zip | 774.31K |
| 114 | 重复_readme-and-terms-of-use-3d-cad-models.txt | 9.25K |
| 115 | GE_3218.ipt | 541.00K |
| 116 | PARTserver55666610.zip | 417.32K |
| 117 | 重复_readme-and-terms-of-use-3d-cad-models.txt | 9.25K |
| 118 | GE_3220.ipt | 494.50K |
| 119 | GE_3220.0001.ipt | 565.50K |
| 120 | 重复_readme-and-terms-of-use-3d-cad-models.txt | 9.25K |
| 121 | PARTserver55666689.zip | 436.05K |
| 122 | PARTserver55665777(1).zip | 76.76K |
| 123 | PU1_50.ipt | 182.00K |
| 124 | 重复_readme-and-terms-of-use-3d-cad-models.txt | 9.24K |
| 125 | Hexagon bolt GB_T 5780 M6 x 50.ipt | 183.00K |
| 126 | ISO 4014 - M3 x 20DIN EN.ipt | 188.00K |
| 127 | ISO 4032 - M8DIN EN.ipt | 163.50K |
| 128 | ISO 4034 - M5DIN EN.ipt | 163.50K |
| 129 | L8 bearing.iam | 64.00K |
| 130 | laser cut assembely.iam | 413.00K |
| 131 | Lasercut frog.ipt | 263.50K |
| 132 | M5 studding.ipt | 66.00K |
| 133 | M8 rod-02.ipt | 67.00K |
| 134 | M8 rod-03.ipt | 62.50K |
| 135 | 重复_M8 rods.ipt | 66.50K |
| 136 | motor mount.ipt | 258.00K |
| 137 | mudguard washers.ipt | 74.00K |
| 138 | CIA0012.ipt | 241.00K |
| 139 | PARTserver55749108.zip | 129.13K |
| 140 | 重复_readme-and-terms-of-use-3d-cad-models.txt | 9.25K |
| 141 | KN_Q06_100.ipt | 112.50K |
| 142 | KN_Q06_100.0002.ipt | 111.50K |
| 143 | PARTserver55749632.zip | 62.20K |
| 144 | 重复_readme-and-terms-of-use-3d-cad-models.txt | 9.28K |
| 145 | CIA0010.ipt | 249.50K |
| 146 | PARTserver55748718.zip | 136.96K |
| 147 | 重复_readme-and-terms-of-use-3d-cad-models.txt | 9.25K |
| 148 | nozzle hoder.ipt | 112.00K |
| 149 | 12mm thick ridged belt adjuster.0002.ipt | 86.00K |
| 150 | 12mm thick ridged belt adjuster.0004.ipt | 86.50K |
| 151 | 21-T5_10-2_Mekanex.0005.ipt | 211.50K |
| 152 | 340mm M8 rod.0002.ipt | 64.00K |
| 153 | 350mm smooth rods (Z).0002.ipt | 61.00K |
| 154 | 400mm smooth rods (Y).0003.ipt | 60.00K |
| 155 | 450mm smooth 8mm rods (X).0003.ipt | 60.00K |
| 156 | 470mm M8 rods.0007.ipt | 63.50K |
| 157 | 4mm thick ridged belt clamp.0003.ipt | 84.00K |
| 158 | 4mm thick ridged belt clamp.0004.ipt | 84.00K |
| 159 | ANSI_IFI 535 - M3x0.5 x 40(1).0001.ipt | 172.00K |
| 160 | ANSI_IFI 535 - M3x0.5 x 40(1).0002.ipt | 171.50K |
| 161 | ANSI_IFI 535 - M3x0.5 x 50(1).0001.ipt | 165.50K |
| 162 | ASME B18.6.3 - 3-56.0002.ipt | 174.50K |
| 163 | ASME_ANSI B18.3.5M - M3x30(2).0002.ipt | 186.00K |
| 164 | bearing holder 02.0003.ipt | 81.00K |
| 165 | bearing holders.0009.ipt | 210.50K |
| 166 | 重复_belt clamp.0003.ipt | 84.50K |
| 167 | belt guide.0004.ipt | 97.00K |
| 168 | Bushe GB_T 12949-2003 8 X 10 X 6.0002.ipt | 142.50K |
| 169 | carriage lid.0025.ipt | 602.00K |
| 170 | carriage plate.0004.ipt | 732.50K |
| 171 | carriage plate02.0003.ipt | 697.00K |
| 172 | cooling system.0002.iam | 69.50K |
| 173 | DIN 125 - A 3.2.0002.ipt | 106.00K |
| 174 | DIN 125 - A 8.4.0002.ipt | 106.50K |
| 175 | DIN 439 - M3 x 0.5.0003.ipt | 159.50K |
| 176 | DIN 555-5 - M6.0001.ipt | 157.50K |
| 177 | DIN 625 SKF - SKF 618_8.0002.ipt | 344.00K |
| 178 | DIN 625 SKF - SKF 626.0001.ipt | 339.00K |
| 179 | DIN 7991 - M3x30.0002.ipt | 172.50K |
| 180 | DIN 913 - M3 x 10.0002.ipt | 159.00K |
| 181 | DIN 963 - M3 x 8.0002.ipt | 171.00K |
| 182 | extroder -02.0007.ipt | 163.00K |
| 183 | extroder driver plate.0013.ipt | 377.00K |
| 184 | extroder driver.0026.iam | 197.00K |
| 185 | extroder holder.0002.ipt | 106.50K |
| 186 | extroder holder.0005.ipt | 104.00K |
| 187 | extroder holder.0006.ipt | 105.00K |
| 188 | fram-01.0011.iam | 110.50K |
| 189 | fram-02.0003.iam | 72.00K |
| 190 | fram-03.0003.iam | 76.50K |
| 191 | fram-05.0009.iam | 74.00K |
| 192 | fram-06.0007.iam | 102.00K |
| 193 | fram-08.0007.iam | 71.50K |
| 194 | fram.0023.iam | 219.00K |
| 195 | fram_04.0013.iam | 94.00K |
| 196 | Hexagon bolt GB_T 5780 M6 x 50.0001.ipt | 182.00K |
| 197 | ISO 4014 - M3 x 20DIN EN.0002.ipt | 187.00K |
| 198 | ISO 4032 - M8DIN EN.0002.ipt | 162.00K |
| 199 | ISO 4034 - M5DIN EN.0002.ipt | 161.50K |
| 200 | laser cut assembely.0014.iam | 394.50K |
| 201 | Lasercut frog.0006.ipt | 260.00K |
| 202 | M5 studding.0002.ipt | 63.00K |
| 203 | M8 rod-02.0007.ipt | 66.50K |
| 204 | M8 rod-03.0001.ipt | 62.00K |
| 205 | M8 rods.0003.ipt | 64.00K |
| 206 | motor mount.0018.ipt | 254.50K |
| 207 | mudguard washers.0002.ipt | 71.00K |
| 208 | nozzle hoder.0002.ipt | 82.00K |
| 209 | nozzle hoder.0004.ipt | 109.50K |
| 210 | panel plug.0003.ipt | 96.50K |
| 211 | panel-plug holder -1.0005.ipt | 104.50K |
| 212 | poly tube.0003.ipt | 75.00K |
| 213 | RepRap PRO.0071.iam | 525.00K |
| 214 | RepRap pro.ipj.bak | 7.27K |
| 215 | RepRapPro Mendel .ipj.bak | 7.27K |
| 216 | stepper motor shaft.0004.ipt | 69.00K |
| 217 | stepper motor y axis assembly.0011.iam | 96.00K |
| 218 | test.0001.ipt | 76.50K |
| 219 | U clip.0004.ipt | 100.00K |
| 220 | vertex with foot.0012.ipt | 165.00K |
| 221 | vertex without foot.0005.ipt | 156.00K |
| 222 | Washer GB_T 9407.28-1988 8.0002.ipt | 163.00K |
| 223 | washer.0002.ipt | 107.00K |
| 224 | X cartridge assembely.0021.iam | 91.00K |
| 225 | X end (idler).0009.ipt | 400.50K |
| 226 | X end (motor).0017.ipt | 294.00K |
| 227 | Y motor lid.0001.ipt | 215.00K |
| 228 | Y motor lid2.0004.ipt | 241.00K |
| 229 | Z motor holder-2.0003.ipt | 128.50K |
| 230 | Z motor holder.0013.ipt | 160.00K |
| 231 | Z-motor holder 22.0001.ipt | 153.50K |
| 232 | panel plug.ipt | 102.50K |
| 233 | panel-plug holder -1.ipt | 104.00K |
| 234 | poly tube.ipt | 77.50K |
| 235 | printscreen.ipt | 96.00K |
| 236 | RepRap PRO.iam | 2.27M |
| 237 | 重复_RepRap pro.ipj | 7.27K |
| 238 | RepRap PRO.stp | 3.23M |
| 239 | SM17_0684.0007.ipt | 163.50K |
| 240 | PARTserver54936924.zip | 108.20K |
| 241 | 重复_readme-and-terms-of-use-3d-cad-models.txt | 9.27K |
| 242 | SM17_0684.ipt | 163.00K |
| 243 | stepper motor shaft.ipt | 71.50K |
| 244 | stepper motor y axis assembly.iam | 101.50K |
| 245 | test.ipt | 77.50K |
| 246 | thermalglass.ipt | 101.50K |
| 247 | U clip.ipt | 98.00K |
| 248 | vertex with foot.ipt | 166.00K |
| 249 | vertex without foot.ipt | 156.50K |
| 250 | Washer GB_T 9407.28-1988 8.ipt | 165.00K |
| 251 | washer.ipt | 107.50K |
| 252 | X cartridge assembely.iam | 97.00K |
| 253 | X end (idler).ipt | 403.00K |
| 254 | X end (motor).ipt | 295.00K |
| 255 | Y motor lid.ipt | 212.50K |
| 256 | Y motor lid2.ipt | 244.50K |
| 257 | 21-T5_10-2_Mekanex.step | 261.00K |
| 258 | 重复_21-T5_10-2_Mekanex.step | 260.94K |
| 259 | 21-T5_10-2_Mekanex.zip | 38.92K |
| 260 | Z motor holder-2.ipt | 96.00K |
| 261 | Z motor holder.ipt | 162.50K |
| 262 | Z-motor holder 22.ipt | 140.50K |
| 263 | 01.png | 681.64K |
免费下载
发布者
思无邪
创作: 7207
粉丝: 69
加入时间：2021-03-05
模型信息
图纸格式：ipt,step
文件大小：54.75M
所需金币：0
上传时间：2021-05-03 06:05:48
是否可编辑：可修改，包括参数
版本：Inventor
标签
图纸简介
版权说明
用户在本站上传的作品如侵犯到您的权益，请与本站管理员联系删除。用户在本站下载的原创作品，只拥有作品的使用权，著作权归原作者所有，未经合法授权，用户不得以任何形式发布、传播、复制、转售该作品。
0.jpg)
0.jpg)
0.jpg)
0.jpg)
0.jpg)
0.jpg)
0.jpg)
0.jpg)
0.png)
0.png)
0.png)
0.png)
0.png)
0.png)
0.png)
QQ在线客服
官方QQ群
